Dual-shield welding is a common arc welding method widely used in various metal welding processes. However, people have gradually become aware of a problem that may occur during dual-shield welding: slag spatter. Slag spatter not only affects the quality of welding but may also compromise workplace safety. Therefore, understanding the mechanisms, influencing factors, and prevention measures of slag spatter is crucial for improving welding efficiency and quality.

I. Mechanisms of Slag Spatter:

Slag spatter mainly occurs because metal droplets in the arc zone during welding are rapidly ejected beyond the welding area due to the influence of electromagnetic forces, airflow, and metal vapor pressure. These droplets may not solidify in time, resulting in spattering.

II. Factors Affecting Slag Spatter:

1. Current and voltage: The magnitude of current and voltage directly affects the heat and stability of the arc, and improper settings of current and voltage are among the main causes of spatter.

2. Arc length: The arc length should be maintained within the optimal range. An excessively long arc can cause instability and increase spatter, while an excessively short one may lead to poor welding.

3. Welding speed: Proper welding speed ensures the formation of good welds; too fast or too slow speeds can affect weld quality and spatter formation.

4. Shielding gas: The type, flow rate, and pressure of shielding gas affect the welding process. Improper use of shielding gas can increase the risk of spatter.

5. Wire extension length: The wire extension length should not be too long, as it may lead to unstable arcs and increased spatter.

6. Condition of welding materials and workpiece surfaces: The cleanliness of welding materials and workpiece surfaces directly affects spatter. Surface oil, rust, or coatings increase the likelihood of spatter.

III. Effective Prevention of Spatter:

1. Adjustment of welding parameters: Proper adjustment of welding parameters is key to reducing slag spatter. Firstly, select appropriate welding current and voltage based on the type and thickness of welding materials. Secondly, adjust the welding speed to ensure a stable and uniform welding process, avoiding excessive speeds that may cause spatter.

2. Increase gas flow: Using inert gas for shielding is crucial to prevent oxygen from entering the welding area. Increasing gas flow can effectively stabilize the atmosphere in the welding area and reduce spatter.

3. Keep welding surfaces clean: Thoroughly clean welding surfaces before welding to remove impurities such as oil, oxides, etc. Clean welding surfaces contribute to the stability of the welding process and reduce spatter.

4. Choose high-quality welding wire: Selecting reliable welding wire is essential. High-quality welding wire with a smooth surface and fewer impurities can reduce slag and decrease the incidence of spatter.

5. Employ appropriate welding techniques: Welders should master correct welding techniques, including welding positions and operating skills. Good welding techniques help stabilize the welding process and reduce the likelihood of spatter.

6. Use anti-spatter agents: Applying a layer of anti-spatter agent to the welding surface can effectively reduce spatter. Anti-spatter agents form a protective film that prevents contact between slag and the welding surface, reducing spatter.

7. Inspect welding equipment and tools: Regularly inspect welding equipment and tools to ensure they are in good working condition. Damaged or aging equipment may affect welding quality and increase the risk of spatter.

Slag spatter in dual-shield welding is a common issue during the welding process. However, by properly adjusting welding parameters, increasing gas flow, keeping welding surfaces clean, choosing high-quality welding wire, mastering correct welding techniques, and using anti-spatter agents, the incidence of slag spatter can be effectively reduced. This helps improve welding quality and efficiency, ensuring the safe progress of the welding process.

Related articles:

1. 10 Secrets to Reduce Welding Spatter

2. Megmeet RDT (Retract Droplet Transfer) Cold Metal Transfer Zero-Spatter High-speed Servo Arc Welding Technology Makes Its Debut at the Exhibition

3. Welding Defects, Problems And Easy Solutions [2023]

4. Welding Defects and Remedies in Steel Material

5. Undercut Welding Defect: Causes, Prevention, and Repair